耐諾硅酸鋯珠(NanorZr-64)：

    耐諾硅酸鋯珠(NanorZr-64)采用進口高純度的鋯英砂為原材料，**的滾動法的成型，中溫?zé)Y(jié)的工藝制成。珠內由致密的硅酸鋯微粒組成微觀結構，拒絕了毛隙和空腔，比同類珠子有更大的密度、硬度和飽滿的球形度，磨耗率是同類硅酸鋯珠的50%。中等的密度和硬度適合中低粘度漿料的分散和研磨，是盤式砂磨機**的配置。

氧化鋯含量: 64%,                   氧化硅含量: 33%,

比      重: >4.0kg/dm³,          散      重: >2.5kg/L,

莫 氏 硬度: >7.0,                 維 氏 硬度: >900kg/mm²,

耐 壓 強度: 1200N(2mm),       粒      徑: 0.4-12.0mm,

噸  磨  耗: <0.05kg/噸,         包      裝: 25kg/桶

NanorZr-64 zirconium silicate bead is made from high pure zircon sand, granulated in a patent way and hardened at a middle temperature kilin. Compared to the other zircon beads and the ATZ beads, it has homogeneous microstructure and no air pockets. This give them 50% lower beads wear than the others. The middle density and higher crushing strength features are suitable to grinding slurry in viscosity from low to middle. It is the best partner of disc type bead mill.

ZrO₂ %: 64 ,                               SiO₂ %: 33

Density: >4.0kg/dm³,                     Bulk Density: >2.5kg/L

Hardness Vickers: >900kg/mm²,       Crushing Strength: 1200N (2mm),

Sizes: 0.4-12.0mm ,                      Packing: 25kg/pail