主要技術參數  Main technical parameter

三輥機特點

·機架采用焊接式框架結構，高冷硬合金輥簡由電機驅動旋轉。

·輥簡及齒輪、皮帶盤均作動平衡調整，故運轉時噪音極低。液壓系統采用先進的雙油缸設計，液壓元件采用進口元件的產品，所以設備具有動作靈敏度高、液壓可靠性強，自動化程度高的優點。

·當冷卻水中斷或輥筒溫度過高，電流過載或有異物落入輥管間、機器會自動停機。

·高靈敏度超聲波傳感器監測物料液面，當物料低于設定的液面值時，系統會停止工作，以保護設備安全。

·三輥機能相匹配喂上料入機。

三輥機工作原理

·三輥機的每根輥筒都配有可精確控制的獨立冷卻系統，能設定并保持物料所需的工作溫度。

·三根輥筒在工作中的三種工作位置：1相互脫離，用于清洗；2兩輥夾緊，一根脫開，用于物料

混合；3三輥夾緊，用于分散和出料。

Features- of the three-roll mill

·The welding type structure is adopted by the frame.The highly hard and cold molded alloy roll  cylinder is driven and rotated by motor.

·The cylinder,gearing wheel and belt pulley are adjusted by dynamic balance so it operates with  the lowest noise.The advanced doubie cylinderis designed for hydraulic system and the key  hydraulic parts are chosen from Parker(lmported).So the mill has the advantages that it is highly sensitive in movement and its hydraulic is greatly reliable.

·When the cooling water stops or temperature of the cylinder is too high or the current overloads or something drops into the cylinders,the mill wilt stop automatically.

·The highly sensitive super-sonic sensor can watch the material's surface and the system will stop working when the quantity of the material is below the level of material surface designed.ln this way, the safety of equipments can be guaranteed.

The three-roll mill is able to match feeder,bead mill,etc.to be the effcient and continuous processing unit.

The three-roll mill' s working principle

·Each cylinder is matched with independent cooling system,which is accurately controlled.The working temperature required by the material can be set and kept evenly and steadily.

·There are three operation positions for the three rolls of the three roils:

a.Separated each other for cIeaning                                                                     

b.Two rolls are clamped,the third one is separated for mixing the material.

c.Three rolls are clamped for dispersing and discharging of material.